Whole House Thermostat Force Type Indoor Gas Water Heater
What is a balanced gas water heater?
Oxygen is taken from the outside to keep the room fresh and free of
oxygen deficiency, and the combustion exhaust gas is discharged
outside, ensuring safe bathing.
Advantage:
Environment-Customized for bathroom installation
Exhaust gas-Double pipeline to prevent CO poisoning
Energy saving-Intelligent changes and upgrades are more
energy-saving
Tempering-You can adjust the temperature at any time
Detail:
Dual-pipe design: indoor zero emission, outer pipe for oxygen supply, inner pipe for
exhaust.
Precise control of water-vapor ratio: constant temperature guaranteed.
Oxygen-free pure copper heat exchanger: higher heat exchange efficiency and energy saving.
Intelligent touch screen: easier to operate.
Power-on self-test: automatic detection to ensure safe use.
Feature:
Zero cold water in the whole house: Upgrade the constant temperature algorithm to solve the bathing
problem and enjoy a constant temperature bath.
Fully sealed combustion-stabilizing system: Using a brand-new combustion system, combined with direct exhaust
from the top fan, the exhaust gas generated by combustion can be
easily discharged, and indoor installation is not a problem.
Fast-burning ignition technology: using segmented combustion system, bathing in summer will not
burn the skin, bathing in winter will not cause coldness.
Low water pressure start: The water pressure on high floors is as low as 0.02MPa, and it
can still start normally.
Specifications:
| Number of liters (temperature rise 25K) (kg/min) | 12 |
| Rated heat load (kW) | 24 |
| Product size(mm) | 522*337*168 |
| Rated electrical power (W) | 38 |
| Energy efficiency rating | level 2 |
| Smoke pipe diameter (mm) | 60 |
| Applicable gas source | Natural gas 12T/Liquefied gas 20Y |
| Rated gas pressure (Pa) | Natural gas 2000/Liquefied gas 2800 |
| Starting water pressure (MPa) | 0.02-1.0 |
| Exhaust method | Forced exhaust type |
FAQ:
Q1 What 's the delivery time of goods ?
Ans: 30-45 days, depends on the material ordered season, usually
after Sep will be busy in the industry.
Q2 When can receive the samples for inspection ?
Ans: 20-40 days, depends on what kind of model, unique model will
be taken longer time for testing and finishing.
Q3 Is OEM acceptable ?
Ans: Yes, it is welcome.
Q4 What is your payment term ?
Ans: Usually 30% deposit in advance, 70% balance paid before
shipment.
Depends on the condition of your market, 20%-30% D/P and 70%-100%
L/C at sight both are workable.
